1030 WALK-BEHIND TRENCHER

At only 32" (813 mm) wide, the Ditch Witch 1030 walk-behind compact trencher can go anywhere and dig in any type of dirt, thanks to the variety of digging chains it can run, including the patented, super-durable Shark Chain II trencher chain. And it doesn't mess around, with a digging chain speed of 276 fpm (84 m/min).

AILS <>LITERAANUAL

GENERAL
Ditch Witch model 1030 self-propelled walk-behind, manually steered, two-wheel drive, rigid-frame, chain-type trencher
DIMENSIONS*	U.S.	METRIC
Trench depth, max.	30 in	760 mm
Angle of approach	35°
Angle of departure	65°
Trench width	4.3 in - 6 in	110 mm - 150 mm
Boom travel, down	60°
Boom travel, up	47°
Centerline trench to outside edge of machine, left	15 in	381 mm
Centerline trench to outside edge of machine, right	17 in	432 mm
Headshaft height, digging chain	8.6 in	220 mm
Transport height	47 in	1.17 m
Transport length	88 in	2.24 m
Wheelbase	32 in	813 mm
Spoils discharge reach	10.6 in	270 mm
Width, transport	32 in	813 mm
Tread	26 in	660 mm
OPERATION	U.S.	METRIC
Vehicle speeds	155 fpm	47 m/min
Digging chain speed	276 fpm	84 m/min
Spoils handling (single, open-end auger) auger-size
Outer diameter	12 in	305 mm
Inner diameter	4 in	102 mm
Length	9 in	229 mm
Trencher cleaner type	Mechanical
Trencher cleaner size	4 in - 6 in	100 mm - 152 mm
Operating weight (based on roller boom and narrow-width digging chain)	900 lb	408 kg
POWER	U.S.	METRIC
Engine	Honda GX340
Type	4-stroke, overhead valve
Fuel	Gasoline
Cooling medium	Air
Number of cylinders	1
Displacement	20.6 in³	337 cm³
Bore	3.2 in	82 mm
Stroke	2.5 in	64 mm
Manufacturer's power rating	11 hp	8.2 kW
Rated speed	3400 rpm
POWER TRAIN
Ground drive transmission: Hydrostatic, infinitely variable from zero to maximum, gearbox to axle, speed and direction controlled with single lever
Pump drive clutch: Mechanical, hand-operated, spring-loaded with tension roller for belt drive
Digging chain clutch: Mechanical, hand-operated, spring-loaded with tension roller for belt drive
Trencher drive: Mechanical; belt drive to reduction drive, headshaft
Belt: 2-groove power band
Digging chain: 33,000-lb (15 000 kg) or 35,000-lb (15 875 kg) test
Chain drive sprocket: Forged and tempered
Spoils handling drive: Mechanical, attached to and rotates with headshaft
TIRES/PRESSURE	U.S.	METRIC
Drive, standard	16 x 6.50-8; 28 psi	193 kPa
Drive, optional	18 x 8.50-8; 22 psi	152 kPa
Trail	13 x 5.00-6; 20 psi	138 kPa
HYDRAULIC SYSTEM	U.S.	METRIC
Drive pump capacity @ 2500 rpm	9.8 gpm	37.1 L/min
Filtration	Return flow, 10 micron nominal
Hydraulic drive motor
Torque @ 1000 psi (69 bar) and 9.8 gpm (37 L/min)	643 in·lb	730 N·m
Speed @ 1000 psi (69 bar) and 9.8 (37 L/min)	410 rpm
Displacement	5.4 in³/rev	88.5 cm³/rev
Type	Bi-directional
FLUID CAPACITIES	U.S.	METRIC
Fuel tank	1.7 gal	6.5 L
Engine oil	2.3 pt	1.1 L
Hydraulic reservoir	4.5 gal	17 L
Hydraulic system	5 gal	18.9 L
Axle oil	2.8 pt	1.3 L
Headshaft gearbox oil	2 pt	1 L

Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features. *Dimensions are based on 16 x 6.50-8 tires and 24-inch (610 mm) depth boom.

Untitled Document

1 2

KEY FEATURES,

1030

Unique, greasable bronze pivot bushing increases reliability.
Quiet, fuel-efficient Honda overhead-valve gasoline engine provides plenty of trenching power.
Accepts multiple sizes and types of trencher chains, from standard cup-tooth to maximum-strength Shark Chain II.

DETAILS,

1030

REQUEST MORE INFO

Mechanical digging drive, hydrostatic ground drive; operator can stop the digging chain and ground drive but keep the engine running by releasing the handlebar bail.
Closed-loop hydraulic ground drive system allows infinitely variable speeds to better match digging conditions.
Easily accessible, easy-to-use color-coded controls.

Axle lock engages both drive wheels to put more power to the ground while trenching, or frees one wheel for easy maneuvering around the jobsite.
A compact trencher that easily fits through a standard yard gate.

LITERATURE,

1030

Select your language to view PDF

English
German
French
Spanish
Russian

MANUAL,

1030

SPECIFICATIONS,

1030



GENERAL
Ditch Witch model 1030 self-propelled walk-behind, manually steered, two-wheel drive, rigid-frame, chain-type trencher
DIMENSIONS*	U.S.	METRIC
Trench depth, max.	30 in	760 mm
Angle of approach	35°
Angle of departure	65°
Trench width	4.3 in - 6 in	110 mm - 150 mm
Boom travel, down	60°
Boom travel, up	47°
Centerline trench to outside edge of machine, left	15 in	381 mm
Centerline trench to outside edge of machine, right	17 in	432 mm
Headshaft height, digging chain	8.6 in	220 mm
Transport height	47 in	1.17 m
Transport length	88 in	2.24 m
Wheelbase	32 in	813 mm
Spoils discharge reach	10.6 in	270 mm
Width, transport	32 in	813 mm
Tread	26 in	660 mm
OPERATION	U.S.	METRIC
Vehicle speeds	155 fpm	47 m/min
Digging chain speed	276 fpm	84 m/min
Spoils handling (single, open-end auger) auger-size
Outer diameter	12 in	305 mm
Inner diameter	4 in	102 mm
Length	9 in	229 mm
Trencher cleaner type	Mechanical
Trencher cleaner size	4 in - 6 in	100 mm - 152 mm
Operating weight (based on roller boom and narrow-width digging chain)	900 lb	408 kg
POWER	U.S.	METRIC
Engine	Honda GX340
Type	4-stroke, overhead valve
Fuel	Gasoline
Cooling medium	Air
Number of cylinders	1
Displacement	20.6 in³	337 cm³
Bore	3.2 in	82 mm
Stroke	2.5 in	64 mm
Manufacturer's power rating	11 hp	8.2 kW
Rated speed	3400 rpm
POWER TRAIN
Ground drive transmission: Hydrostatic, infinitely variable from zero to maximum, gearbox to axle, speed and direction controlled with single lever
Pump drive clutch: Mechanical, hand-operated, spring-loaded with tension roller for belt drive
Digging chain clutch: Mechanical, hand-operated, spring-loaded with tension roller for belt drive
Trencher drive: Mechanical; belt drive to reduction drive, headshaft
Belt: 2-groove power band
Digging chain: 33,000-lb (15 000 kg) or 35,000-lb (15 875 kg) test
Chain drive sprocket: Forged and tempered
Spoils handling drive: Mechanical, attached to and rotates with headshaft
TIRES/PRESSURE	U.S.	METRIC
Drive, standard	16 x 6.50-8; 28 psi	193 kPa
Drive, optional	18 x 8.50-8; 22 psi	152 kPa
Trail	13 x 5.00-6; 20 psi	138 kPa
HYDRAULIC SYSTEM	U.S.	METRIC
Drive pump capacity @ 2500 rpm	9.8 gpm	37.1 L/min
Filtration	Return flow, 10 micron nominal
Hydraulic drive motor
Torque @ 1000 psi (69 bar) and 9.8 gpm (37 L/min)	643 in·lb	730 N·m
Speed @ 1000 psi (69 bar) and 9.8 (37 L/min)	410 rpm
Displacement	5.4 in³/rev	88.5 cm³/rev
Type	Bi-directional
FLUID CAPACITIES	U.S.	METRIC
Fuel tank	1.7 gal	6.5 L
Engine oil	2.3 pt	1.1 L
Hydraulic reservoir	4.5 gal	17 L
Hydraulic system	5 gal	18.9 L
Axle oil	2.8 pt	1.3 L
Headshaft gearbox oil	2 pt	1 L

Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features. *Dimensions are based on 16 x 6.50-8 tires and 24-inch (610 mm) depth boom.

ATTACHMENTS,

1030

TRAILERS,

1030

The following single-axle trailers are available for 1030 :

S1A

JOB RELATED, 1030

Dig Deeper Into Your Digging Systems, Part II
What to look for in digging system components.

Keeping Your Fleet's Hydraulic Systems Running Properly
If your machine's hydraulic system isn't working, neither are you. Here are some common causes of hydraulic system breakdown and steps you can take to avoid them.

FTTH Growth Stays on Track as Connections Rise
The upgrading of North America's last mile networks with end-to-end fiber is continuing at a robust pace, with fiber to the home (FTTH) arriving at more than 1.6 million households over the past year, bringing the total number of FTTH subscribers to 3.76 million, according to a study released today by the Fiber-to-the-Home Council.

Dig Deeper Into Your Digging Systems
A properly maintained digging system is essential to trencher performance.

Time For Your Spring Checkup
Spring is a great time to prepare your Ditch Witch equipment for the upcoming busy season. A little attention now can help you be ready when those landscaping, trenching, plowing, and drilling jobs start coming in.

Chain Of Events
The efficiency of any machine depends on the efficiency of each of its parts. In the case of digging systems, one defective part—a stripped bolt, worn tooth or inferior sprocket— can mean the failure of the entire system.

Bland Landscaping Keeps Busy
Bland recently added a new machine that combines the benefits of a skid steer loader and mini excavator. The Ditch Witch® XT850 has a digging boom and bucket on one end and tool carrier component on the other. The tool carrier can be equipped with many types of interchangeable attachments, making the machine a multi-purpose product that can excavate and perform multiple special jobs.

Trencher Maintenance
Proper maintenance is essential to keep trencher units operating efficiently. Performing routine maintenance and repairing minor problems as soon as they are identified reduce the chance of breakdowns in the field, and an effective maintenance program extends equipment life and protects the value of equipment.

Trencher Safety
Today, as it has always been, safety is a personal choice that each person must choose. We make that personal choice every day, even as we drive to work, when we choose whether or not to obey speed limits. Proper operating procedures, like speed limits, are put into place to protect not only the operator, but everyone that may be around from co-workers to bystanders.

Winterizing Article
Take the time to winterize your equipment this year. A few minutes spent could save you time and money in the months to come. The amount of winter care your equipment needs depends both on the climate and how it is used.

Selecting The Right Trencher
Trenchless procedures are best suited for jobs where surface improvements, existing underground utilities, and restoration costs make excavation impractical or impossible. But because many utility construction projects continue to be in open country where these factors are not issues, trenching often is the most efficient and cost-effective method of installing underground cable and pipe.