R150 2WDPOWER UNITS

Even with its many innovative features, the 15-hp (11.2 kW) Zahn R150 is only 36 inches (914 mm) wide, so it can get in, out, and around the tightest jobsites with ease: through standard yard gates and around small backyards, in freight elevators, between zero-lot-line homes, in alleyways, barns, horse stalls—anywhere the job demands. And, once on the jobsite, demand all you want from the Zahn R150.
<> <>DETAILSITERATURE <>MANUALZahn R150 2WD Power Units 1

<>SPECSRONT ENDS <>SAFETYJOB RELATED

SPECIFICATIONS, 

R150 2WD
With 18 X 9.5-8 Tires
DIMENSIONS* U.S. METRIC
Tractor back to rear axle 26.8 in 681 mm
Rear axle to attachment mounting 19.2 in 488 mm
Mobile height 53.5 in 1.36 m
Ground clearance 5.3 in 135 mm
Platform height 10.7 in 272 mm
Width 36 in 914 mm
Angle of departure 25°
Mass 968/1010 lb 439/458 kg
OPERATION U.S. METRIC
Ground drive speed, forward

    Low 3.3 mph 5.3 km/h
    High 3.3 mph 5.3 km/h
Ground drive speed, reverse

    Low 3.3 mph 5.3 km/h
    High 3.3 mph 5.3 km/h
POWER PLANT U.S. METRIC
Engine Honda IGX440
Fuel Gasoline
Cooling medium Air
Number of cylinders 1
Displacement 26.7 in3 438 cm3
Bore 3.46 in 88 mm
Stroke 2.84 in 72.1 mm
Manufacturer's power rating 15 hp 9.5 kW
Rated speed 3600 rpm
POWER TRAIN
Parking brake: Mechanical, hand operated
Service brake: Ground drive speed/direction control brakes machine hydraulically when moved to neutral position
TIRES/PRESSURE U.S. METRIC
18 x 9.5-8, 2-ply, bar lug 12 psi 82.7 kPa
    Tire assembly mass 22 lb 9.98 kg
Urethane filled 18 x 9.5-8, 2-ply, bar lug N/A N/A
    Tire assembly mass 36 lb 16.33 kg
18 x 8.5-8, ply, turf 22 psi 151.7 kPa
    Tire assembly mass 20 lb 9.07 kg
HYDRAULIC SYSTEM U.S. METRIC
Auxiliary: Gear pump

    Flow rate 7.4 gpm 28 L/min
    Pressure 3000 psi 207 bar
Ground drive: Hydrostat

    Flow rate 11.4 gpm 43.2 L/min
    Pressure 1800 psi 124 bar
FLUID CAPACITIES U.S. METRIC
Fuel tank 10.9 gal 41.3 L
Engine oil, including filter 1.6 qt 1.1 L
Hydraulic reservoir 7.7 gal 29.1 L
Total hydraulic system volume 8.5 gal 32.2 L
BATTERY U.S. METRIC



R150E only

    SAE reserve capacity rating 32 min
    SAE cold crank rating @ 0° F (-18° C) 200 amps

*Unless otherwise specified, all figures are for standard equipment only. Specifications are called out according to SAE recommended procedures. Due to selected options, delivered equipment may not necessarily match that described. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured.